15針單頭超大刺繡面積：xunshoux500mm

xunshou前沿技術：DCP數控壓腳、多色繩繡、手繡功能等

包羅萬象的成品繡花框，滿足更多元化的成品刺繡需求

采用數控壓布腳，輕松簡單地在厚面料和皮革上刺繡

 專利數控壓布腳，可根據面料厚薄程度調整，減低對所繡面料造成的壓痕或損壞；同時，優化壓布腳壓布時間，防止所繡面料顫動走位，提升刺繡新標準。專利數控壓布腳對應多元化各式各樣面料，廣泛適用于皮革、厚布料、彈性面料、絎縫夾棉類面料上。

適用行業：

潮流服裝服飾店、連鎖專賣店、DIY個性刺繡網店、家庭/手繡小作坊、學院/機構教學、工廠打樣/小批量生產、大學生/夢想者創業

服務：

免費遠程技術支援、師傅上門安裝調適、師傅廠房布置店鋪布置指導、專業系統的操作培訓、及專業系統的制版培訓、專業高難度繡花技術培訓、專業高難度制版培訓、阿里巴巴零配件網購、小批量輔料田島代購、廠家直銷終身服務。

Huizhou Long Ling Information Technology Co. Ltd.

Single-Head Automatic Embroidery Machine

The next generation mode with the Digitally Controlled Presser Foot "DCP"

A wide area can be secured all around the frame, It can be easily installed for quick changeover with minimal down time.

The air clamp makes large sized bags easy to embroider.

It can also embroider on slim items like socks.

What is the DCP

The machine can embroider on thick material or seamed sections without fluttering due to Tajima’s latest feature.

DCP is an abbreviation for Digitally Controlled Presser Foot. Moving “Presser Foot” to press the fabric by the motor presses surely.

As the lowest point of Presser Foot can be easily set on the operation panel according to the thickness of fabric,

There are no worries about damage to the fabric by the presser foot. And it is very efficient for 3D embroidery using urethane on cap.

The FS mode is good for loosely twisted thread

The FS mode is best suited for loosely twisted threads as it can embroider this type of fine thread with a high quality finish.

By using the FS mode exclusive parts (sold separately) a nice lofty finish can be achieved.

It can easily embroider on sleeves or pockets

With the new type slim cylinder that has been reduced by 12% in width, it is even better for working on children’s wear or xsaller pockets.

Network

Embroidery data can be easily sent to the machines by connecting the embroidery software to a network.

For name tag embroidery, autograph is recommended as it simplifies the process. In addition to the DG/,

it allows for the xsoothest design date generation and tranxsission to the machine.